Meaning
Electromagnetic interaction between adjacent antennas in a multi-element array redistributes the currents and alters the radiation pattern. Array designers must account for mutual element coupling to ensure that individual transmitters do not distort each other’s output. The severity of the effect is bounded by the physical distance between the active traces and the substrate thickness.
Isolation Metric
Scattering parameters measure the amount of energy transferred from one feedline to another. A low isolation value indicates high mutual element coupling, which degrades the efficiency of the overall array. Technicians measure these values using vector network analyzers during the initial prototype validation phase.
Performance Consequence
Impedance mismatch arises when the current induced by neighboring elements alters the driving point impedance of an antenna. This change increases the reflected power, which can lead to higher thermal loads on the power amplifiers. In extreme cases, the system must reduce the transmit power to protect the RF front-end from damage caused by high voltage standing wave ratios.
Consequently, the effective isotropically radiated power of the device drops below the required minimum for network certification.
Circuit Mitigation
Physical barriers such as defected ground structures are etched into the board to suppress surface waves. Decoupling networks or metal shielding walls reduce mutual element coupling to acceptable limits.