Meaning
Unwanted frequency components generated by the interaction of multiple input signals within a non-linear device cause signal distortion. These non-linear mixing products occur when an amplifier or mixer is driven beyond its linear region of operation. They can fall directly into the receiving band of a radio and degrade performance.
Distortion Analysis
Power series mathematical models describe the generation of these spurious signals as combinations of the fundamental input frequencies. This mathematical trace of non-linear mixing products explains why third-order intermodulation products are particularly dangerous to radio performance. These signals sit close to the primary channel and cannot be filtered out easily.
Hardware Management
System designers use high-performance components with high intercept points to minimize intermodulation distortion and preserve signal clarity in multi-channel systems. For non-linear mixing products, selecting a low-noise amplifier with a high third-order input intercept point is a common mitigation strategy that ensures linear operation over a wide dynamic range. This high-linearity component prevents the generation of unwanted intermods in the presence of strong adjacent-channel transmitters.
It protects the sensitivity of the receiver and maintains the overall signal-to-noise ratio.
Filter Application
Spurious emissions are suppressed by placing bandpass filters after the mixing stage. This filtering of non-linear mixing products blocks the unwanted frequencies. It ensures the transmitter complies with regulatory standards.