Meaning
Mechanical holes drilled through printed circuit board substrates without conductive wall metallization provide structural mounting locations and electrical isolation. Incorporating non-plated thru-holes into a board layout prevents unintended electrical grounding between mounting hardware and internal copper planes. Board fabricators execute NPTH secondary drilling operations after copper etching to maintain clean, non-conductive dielectric walls.
Mechanical fasteners and guide pins utilize these features to secure assembled circuit boards within protective housings.
Fabrication Sequence
Drill file execution splits hole processing into distinct primary plating and secondary unplated steps. Specifying non-plated thru-holes requires CAM tooling software to assign dedicated drill program routines following outer-layer etching. Drilling through bare substrate without electroless copper exposure ensures complete electrical isolation across the hole boundary.
Assembly plants rely on precise NPTH positions to align surface-mount stencils and pick-and-place carrier fixtures accurately.
Mechanical Alignment
Component placement machines use unplated mounting features as primary mechanical registration points during assembly line tooling. Integrating non-plated thru-holes enables stable mechanical fastening without risking shorts to nearby ground planes. Enclosure alignment pins insert directly into these unplated features during final device assembly.
Feature Boundary
Unplated mounting features provide precise physical positioning without contributing to electrical net interconnectivity. While non-plated thru-holes provide stable physical retention, electrical signals cannot transit through these unplated openings. The feature definition applies exclusively to unplated mechanical voids within the substrate structure.