Meaning
Radio receiver performance metrics specify the ability of a device to process a desired signal in the presence of strong interference at frequencies outside the designated channel. When evaluating out-of-band blocking, engineers measure how well a receiver rejects unwanted high-power transmissions from nearby devices operating in adjacent frequency bands.
Measurement Method
Testing this capability involves feeding the receiver with two signals simultaneously. The first signal is the desired low-power signal, while the second is a high-power interfering signal set to a frequency far from the receiver passband. The test procedure increments the power of the interferer until the receiver sensitivity degrades by a defined amount.
This threshold determines the resilience of the receiver to external interference.
Receiver Design
Achieving high rejection of these outside signals requires sharp filtering at the antenna input. Bandpass filters must attenuate out-of-band signals before they reach the low-noise amplifier. If the filter is inadequate, the amplifier enters saturation and generates distortion that masks the desired weak signal.
This vulnerability is mitigated by selecting high-quality surface acoustic wave filters or bulk acoustic wave filters.
Regulatory Limit
Conformity testing standards define the specific test frequencies and power levels that a receiver must tolerate. These limits vary by region and application. Passing this test is a mandatory step for global wireless certification.