Meaning
Unintended electromagnetic emissions occur at integer multiples of the fundamental operating frequency in a radio transmitter. These instances of parasitic harmonic radiation result from non-linearities in the power amplifier or the antenna switch. If these signals are too strong, they interfere with other wireless services such as cellular networks or navigation systems.
Controlling these emissions is a requirement for meeting global electromagnetic compatibility standards.
Components Switching
Energy spikes appear as peaks in the frequency spectrum during rapid transitions. Filtering stages are designed to suppress parasitic harmonic radiation while allowing the main signal to pass through. Designers often use low-pass filters at the output of the transmitter to trap these high-frequency components.
Interference Assessment
Background noise from a nearby device can drown out weak signals in a receiver. When parasitic harmonic radiation leaks from an enclosure, it can cause a product to fail its emissions test. Engineers must trace the leakage to its source, which might be a poorly grounded trace or a gap in a metal shield.
Circuit Layout
Positioning of transmission lines determines the spread of noise across the board. Placing decoupling capacitors close to the power pins of the amplifier helps to stabilize the voltage and lower parasitic harmonic radiation levels. Shielding cans provide an additional layer of protection by redirecting the energy back into the board.
These steps ensure that the device operates within the legal limits for radio spectrum usage.