Meaning
Federal Communications Commission rules governing unintentional radio frequency emissions mandate strict radiated and conducted limits for digital electronics and processing sub-systems. Achieving Part 15 Subpart B compliance ensures that microprocessors and switching power supplies inside a commercial product do not cause harmful interference to licensed radio services. The regulatory standard classifies equipment into Class A for commercial environments and Class B for residential applications, with Class B enforcing tighter limits.
This verification applies to all digital hardware sold in the United States that generates clock signals above nine kilohertz, regardless of whether intentional wireless transmitters are present.
Unintentional Radiation
High-speed digital traces and switching regulators produce electromagnetic energy that can radiate from printed circuit boards and attached cables. Demonstrating Part 15 Subpart B compliance involves measuring radiated emissions from thirty megahertz up to five times the highest internal clock frequency inside an anechoic chamber. Line-conducted emissions measurements assess noise injected back into AC power mains between one hundred fifty kilohertz and thirty megahertz.
Shielding enclosures and ferrite beads suppress unwanted harmonics below mandatory thresholds.
Testing Standard
Accredited testing laboratories perform standardized measurement procedures specified in ANSI C63.4 to verify compliance. Documenting Part 15 Subpart B compliance requires calibrated antenna measurements at three-meter or ten-meter test distances.
Authorization Route
Verification of digital device emissions follows either the Supplier Declaration of Conformity or formal certification paths based on product classification. Completing Part 15 Subpart B compliance grants authorization to affix required FCC labeling and market the finished electronic assembly legally.