Meaning
Material resistivity changes resulting from applied physical force or strain form the foundational sensing mechanism of integrated pressure and acceleration detectors. Micro-electro-mechanical systems utilize the piezoresistive effect to convert physical stress into a measurable voltage variation. This conversion provides a highly responsive electrical signal that corresponds to minute shifts in load.
Sensor Integration
Silicon diaphragms suspended over etched cavities experience localized strain when external pressure shifts. In these structures, the piezoresistive effect generates a differential signal across a balanced bridge circuit integrated on the die. Circuit board designers must ensure that enclosure mounting forces do not stress the sensor body.
Excessive mounting stress causes baseline drift that mimics an active pressure change.
Temperature Sensitivity
Thermal expansion differences between the silicon sensor and the package material introduce unwanted strain. This strain influences the piezoresistive effect and causes drift in the zero-pressure output value.
Calibration Methods
Compensation algorithms run on the co-packaged application-specific integrated circuit to cancel out the thermal errors. These routines write multi-point correction coefficients to internal registers during final assembly line evaluation. Multi-point testing runs each module through pressure and temperature sweeps to generate the unique calibration curves.
This procedure ensures a stable and linear device output under all operating conditions.