Meaning
Physical reduction in volume occurs when a liquid resin or adhesive cures into a solid polymer. This polymer cure shrinkage can pull on solder joints and shift the physical positions of embedded antenna elements. It is a critical factor in the manufacture of molded electronics.
Mechanical Stress
Shrinkage forces exert mechanical pressure on surface-mount components, which can lead to micro-cracking in solder joints. This stress is concentrated at the interfaces between different materials, such as copper, fiberglass, and the cured resin. Engineers must design the mold layout to distribute these forces evenly.
RF Compensation
Dielectric changes and physical movement of the antenna traces must be accounted for in the initial circuit design. This shrinkage often shifts the antenna slightly closer to the ground plane, changing its resonant frequency. Designers compensate for this by shift-tuning the prototype antenna before molding so that the cured product matches the target frequency, ensuring optimal range.
Such foresight prevents the need for board redesigns after the molding tools have been created.
Process Control
Cure temperature and ramp rates must be managed to minimize the rate of volumetric reduction during solidification. Slow curing at lower temperatures helps distribute the internal stress and reduces the overall shrinkage. This controlled cooling phase prevents delamination between the resin and the circuit board, preserving long-term reliability.