Meaning
Passive networks consisting of interconnected resistors and capacitors generate precise multiphase sinusoidal signals from a single-phase input. This phase-shifting network is the polyphase filter, which is widely used in radio-frequency transceivers to generate the in-phase and quadrature signals required for image-reject mixers. The circuit operates by combining the different phase shifts of high-pass and low-pass paths at a specific center frequency.
It provides a simple, low-power solution for generation of quadrature phases on-chip.
Design Topology
Single-stage implementations offer a narrow bandwidth over which phase balance is maintained. Multi-stage polyphase filter designs cascade sections to broaden the bandwidth.
Mismatch Effect
Component tolerances in the resistors and capacitors directly degrade the quadrature accuracy of the output. In a polyphase filter, mismatches cause amplitude and phase imbalances that limit the image rejection performance of the mixer. Dynamic calibration or digital compensation is often required in high-performance systems to correct for these physical discrepancies.
Layout Integration
Layout symmetry is critical during integrated circuit design to minimize the parasitic differences between the signal paths. Symmetrical placement of resistors and capacitors prevents the polyphase filter from introducing additional phase error. Routing parasitic capacitances must be matched precisely to prevent shifting the center frequency of the filter stages.
Production testing verifies the quadrature phase accuracy across the operating frequency band by measuring the suppression of the unwanted sideband in a modulated output signal.