Meaning
Final thickness of a prepreg layer after the lamination process has forced out air and compacted the resin. Prepreg cured thickness determines the separation between conductive layers and directly influences the characteristic impedance of transmission lines. This value depends on the initial resin content, the glass style, and the pressure applied during the press cycle.
Accurate prediction of this dimension is essential for achieving the electrical performance targets of a multilayer board.
Resin Flow
Excess material moves into the spaces between copper traces on adjacent layers during the curing stage. The resulting prepreg cured thickness is always less than the nominal un-cured thickness because of this displacement. Manufacturers use flow models to estimate how much resin will fill the copper voids based on the circuit density.
A design with high copper coverage will result in a thicker dielectric layer than one with sparse copper.
Stackup Validation
Design validation requires accounting for the cumulative tolerances of every layer to ensure the final assembly fits within the enclosure. The calculated prepreg cured thickness is documented in the stack-up drawing provided to the fabricator. Deviations from these values can shift the resonant frequency of RF structures or cause timing errors in high-speed buses.
Automated optical inspection and cross-sectioning are used to verify these dimensions after lamination.
Dielectric Influence
Thickness variation changes the capacitance between the trace and the reference plane. Maintaining a consistent prepreg cured thickness across the panel ensures that the signal velocity and impedance remain uniform. This consistency is particularly important for differential pairs where any imbalance increases electromagnetic interference.
Proper selection of glass styles with high resin content helps in achieving more predictable cured dimensions.