Meaning
Granulated thermoplastic scrap recovered from runner systems and rejected molded parts is blended with virgin material for re-injection into molding processes. Granulated polymer particles undergo multiple heat cycles, reducing molecular weight through thermal and mechanical shear mechanisms. This reprocessed material stream establishes the economic limit of material efficiency, defining the maximum re-use percentage permissible before mechanical strength or electrical insulation properties drop below product specifications.
Thermal Degradation
Multiple heat cycles during extrusion and molding break polymer chains, reducing average molecular weight and broadening molecular weight distribution. Chain scission lowers impact resistance and tensile strength compared to prime virgin resin properties. Adding regrind resin increases melt flow index, which alters cavity filling dynamics and shrinkage rates during injection molding operations.
Thermal history accumulated in reprocessed scrap elevates yellowing index and increases susceptibility to stress cracking under solvent exposure.
Blend Ratio
Process engineering guidelines specify strict upper limits for reprocessed content, typically restricting additions to between fifteen and twenty-five percent by weight. Homogeneous mixing of granulated particles with virgin pellets prevents localized pockets of degraded resin within molded electronic housings. Excessive regrind resin percentages cause dimensional variance and structural weakness around internal mounting bosses or snap-fit connectors.
Uncontrolled blending leads to batch-to-batch inconsistency in structural integrity and surface finish quality across production runs.
Quality Verification
Incoming inspection protocols test melt flow rate and impact strength of incoming regrind batches before approving material for production loading. Differential scanning calorimetry measures thermal history and crystallinity changes to detect thermal degradation limits. Tensile bar testing confirms that structural housing components satisfy drop-test requirements when produced with specified blend ratios.
Quality assurance documentation tracks reprocessed material usage ratios across production lots to satisfy mechanical reliability standards for commercial enclosures.