Meaning
Compliance with electromagnetic radiation safety limits requires measuring the rate at which radio frequency energy is absorbed by the human body. This laboratory evaluation, known as SAR bench testing, utilizes a synthetic human body phantom filled with tissue-equivalent liquid to measure the electric field strength near the transmitter. The resulting data determines whether the device complies with regional safety standards before it can be legally sold.
Robotic Evaluation
The physical setup for SAR bench testing involves a computer-controlled robotic arm that moves a miniature electric field probe through the liquid phantom. This probe scans the areas of highest radiation intensity while the device transmits at its maximum power level. Technicians calibrate the probe to ensure that the measured voltage corresponds accurately to the energy absorption rate.
This automation ensures high precision and repeatability across different device designs, which is necessary because even a millimeter of antenna misalignment can double the localized energy absorption. By running these scans across all supported frequency bands, the laboratory compiles a complete map of the radiation field.
Chamber Condition
Environmental factors inside the testing laboratory must be tightly controlled during SAR bench testing to prevent measurement errors. Ambient temperature changes alter the dielectric properties of the phantom liquid, which skews the absorbed energy measurements. The liquid must be replaced or replenished regularly to maintain its correct density and electrical conductivity.
This testing is therefore conducted in a shielded room to block any external wireless interference.
Regulatory Approval
Reports generated during compliance testing list the highest measured absorption rates for each transmission frequency and antenna location. This document is required by regulatory agencies such as the Federal Communications Commission to grant market clearance. Wireless devices must remain below the specified absorption limits to pass the inspection.
Consequently, this testing sequence represents the final hurdle before a cellular product can enter the commercial market.