Meaning
Statutory provisions established within Title 47 of the United States Code of Federal Regulations govern unintentional radiator radiated emission limits. Under Section 15 109, electric field strength restrictions apply to any electronic device that generates internal radio frequency signals for operation but does not deliberately transmit over the air. These boundaries prevent digital microprocessors, clock circuits, and internal switching networks from causing interference to licensed communication channels.
The regulation applies exclusively to unintentional radiation, terminating where intentionally transmitted signals fall under separate governing subparts.
Class Boundaries
Regulatory categorization splits electronic systems into Class A and Class B tiers based on operational context. Class A equipment covers hardware marketed exclusively for use in commercial, industrial, or business environments. Class B equipment covers devices intended for deployment inside residential spaces, enforcing roughly ten decibels tighter emission limits to safeguard home radio and television reception.
Radiated emission limits are quantified as field strength measured in microvolts per meter across measurement distances of three, ten, or thirty meters depending on frequency bands. The regulated frequency band extends from thirty megahertz up to several gigahertz, scaling proportionally with the highest internal clock frequency utilized inside the product.
Digital Integration
Board-level clock routing, processor bypass networks, and enclosure shield seams determine whether integrated hardware complies with these thresholds. High-speed differential signals, memory interfaces, and micro-controller clock nets generate harmonic spikes that propagate through printed circuit board planes. Unintentional slot antennas form along the mating interfaces of metallic housings when fastener spacing exceeds fractional wavelengths of the internal clock frequencies.
Solid ground return paths directly beneath high-speed digital traces contain common-mode currents that would otherwise couple into internal cabling. Decoupling capacitors with low equivalent series inductance placed directly at integrated circuit power balls shunt high-frequency switching energy to ground before it radiates.
Measurement Formalities
Laboratory qualification requires an accredited test facility employing an open-area test site or a semi-anechoic chamber. Calibrated biconical, log-periodic, and horn antennas capture radiated field strength across automated turntable rotations and antenna mast height scans ranging from one to four meters. Quasi-peak and average detectors quantify peak spectral emissions to verify that no harmonic spike surpasses designated field strength curves.
The completed compliance report populates the product technical documentation file, authorizing application of the Supplier Declaration of Conformity or supporting an equipment authorization submission. Legal entry into the United States consumer electronics marketplace requires formal verification against these field strength boundaries.