Meaning
Control system test procedures where a disturbance signal is introduced into a closed loop measure the open-loop frequency response. Motion control engineers use servo loop injection to evaluate the stability margins of high-performance motor drives. This technique determines both phase margin and gain margin.
The test is performed while the loop remains closed.
Disturbance Signal
Sinusoidal perturbations across a sweep of frequencies are added to the control output or error signal. During servo loop injection, a network analyzer measures the amplitude and phase differences before and after the insertion point. This data is used to generate Bode plots of the system response.
The sweep covers the expected bandwidth of the physical mechanism.
Loop Stability
Phase margin is derived from the frequency where the open-loop gain crosses zero decibels. If servo loop injection reveals low phase margin, the drive may oscillate when subjected to step changes in position or load. Tuning parameters are adjusted in the software to shape the frequency response.
This adjustment ensures reliable operation without excessive overshoot.
Practical Execution
Specialized hardware modules are connected in series with the feedback sensor lines or the torque command paths. Safe servo loop injection requires that the disturbance amplitude be kept small enough to avoid saturating the amplifier or driving the motor into its mechanical limits. This is especially true for delicate systems with limited travel like linear stages or voice coil actuators.
Technicians monitor the physical response to ensure that the motor does not undergo violent vibration during the frequency sweep. The resulting plots are stored in the device’s documentation folder as a baseline for future maintenance audits.