Meaning
Electromagnetic compatibility in electronic assemblies demands physical enclosures that block high frequency radiation. Through the process of shield can stamping, a progressive die presses thin sheets of metal into custom protective covers that fit over board mounted RF components. This manufacturing technique produces lightweight, low cost enclosures that prevent electromagnetic interference between circuit modules.
The process boundaries exclude thick cast enclosures, focusing instead on thin, high volume metal sheets.
Mechanical Manufacturing
Metal selection determines the flexibility and electrical performance of the finished protective can. During shield can stamping, nickel silver or tin plated steel is fed into the press to ensure high conductivity and solderability. Intricate details like ventilation holes and internal dividers are formed in a single operation.
This automation keeps manufacturing tolerances extremely tight to ensure a perfect fit on the circuit board.
Thermal Integration
The metal shield can double as a heat sink when thermal interface materials are applied. This dual use manages the temperature of power amplifiers during continuous operation.
Solder Attachment
Circuit boards utilize surface mount pads to receive the stamped metal shields during reflow soldering. The shield can stamping must include small holes or dimples to allow trapped air to escape when the solder paste heats up. These design features prevent the shields from shifting or lifting off the board due to internal pressure.
Once soldered, the shields form a complete Faraday cage that ensures compliance with regulatory emission standards.