Meaning
Connection parameters that permit a peripheral node to intentionally bypass a predetermined number of consecutive connection events without breaking active link synchronization lower energy requirements in low-power communications. A slave latency value defines the maximum count of sequential anchor points that a peripheral may ignore when it holds no pending outbound payload data. The central device continues to track the connection state without declaring a supervision timeout during these ignored events.
The parameter governs peripheral wake frequencies exclusively during non-data connection states, ending immediately whenever the peripheral transmits data or receives payloads containing down-link traffic.
Parameter Negotiation
Establishing this operational mode requires a structured exchange of link layer control protocol packets. The peripheral initiates an update request containing the desired slave latency integer, which must remain below the value of the supervision timeout divided by the connection interval minus one. The central controller evaluates the proposed integer against active quality-of-service profiles and channel sharing demands before transmitting an acceptance response.
Once ratified, the peripheral selectively sleeps through scheduled anchor points. The central maintains its transmit sequence counters, anticipating sporadic peripheral acknowledgments.
Current Budget
Peripheral nodes achieve extensive operational life extensions by remaining in low-power sleep modes across hundreds of milliseconds. Using slave latency, a peripheral configured with a 30 millisecond connection interval and a latency value of nine wakes only once every 300 milliseconds in the absence of data. This reduction in radio frequency activity cuts average current draw from hundreds of microamperes to low single-digit microamperes.
The peripheral retains the ability to transmit instantly at the next immediate connection event if local sensor thresholds trip. Rapid transmission maintains application responsiveness while conserving cell capacity.
Supervision Boundaries
Excessive latency settings introduce risks of unintended connection termination during transient radio frequency interference events. If a device utilizing slave latency encounters physical channel interference on the single event it wakes for, consecutive missed packets quickly exhaust the supervision timeout window. The central link layer drops the connection if communication fails to occur before the timeout threshold expires.
Firmware algorithms dynamically reduce active latency settings during burst transmissions or when local received signal strength indicators fall below link safety margins. Adaptive tuning prevents unexpected connection collapse.