Meaning
Mathematical relationships in spread-spectrum modulation allow multiple transmissions on different coding configurations to coexist on the same frequency channel without interference. This spreading factor orthogonality means that a receiver can isolate a specific signal by using the corresponding spreading code, even if other signals are present at the same time and on the same frequency. The separation relies on the mathematical properties of the codes, which have zero or very low cross-correlation.
This feature is the foundation of multi-access systems like LoRa networks, enabling the concurrent reception of multiple data streams on a single frequency channel by a multi-channel gateway.
Coding Separation
Each spreading factor uses a different rate of chirps to expand the original data symbol across the frequency band. When these chirps have different slope values, their overlapping signals do not combine in a way that destroys the data. The receiver uses a correlation process to pull out the matching signal while treating the other transmissions as low-level background noise.
This isolation allows the network to process several incoming packets at once on the same channel.
Capacity Scaling
Using different spreading factors allows the network to handle more active devices simultaneously. Gateways can receive multiple packets at the same time if they are transmitted using different codes, which increases the total data throughput. However, if two devices use the same code and transmit on the same frequency, their signals will collide unless there is a significant difference in power.
This coding diversity is managed by the network server to optimize the overall channel utilization.
Receiver Separation
The practical limit of this isolation is defined by the cross-correlation properties of the codes, which are never perfectly orthogonal in real-world hardware. When a very strong signal is close to the gateway, it can block a weaker signal even if they use different spreading factors. This near-far problem requires dynamic power control on the transmitter side to maintain balance.