Meaning
Initial tensioning force maintains a permanent load on a mechanical assembly to prevent the separation of mating components. Engineers apply spring preload to bearings and lead screws to ensure that the rolling elements remain in contact with their races at all times. This constant force removes the clearance that would otherwise result in lost motion or vibration.
The specific value of the preload is a trade off between system stiffness and frictional resistance.
Backlash Elimination
Constant pressure from a wave washer or a coil spring keeps the nut of a drive system pressed against one side of the thread. While a loose fit would allow the shaft to rotate slightly without moving the load, spring preload ensures that every movement is transferred immediately to the output. This responsiveness is necessary for high precision positioning where the direction of travel changes frequently.
Precision instruments often use this technique to maintain sub micrometer repeatability.
Load Capacity
Amount of force required to overcome the internal tension defines the point at which the components might begin to separate. If the external working load exceeds the spring preload, the assembly loses its stiffness and the accuracy of the system degrades rapidly. Designers must calculate the worst case forces to ensure the preload is sufficient for all operating conditions.
Excessive force increases the wear rate and reduces the overall life of the bearings.
Structural Stability
Mechanical integrity in harsh environments depends on the ability of the spring to maintain its force despite temperature changes or vibration. Choosing a spring preload with a low rate allows for some thermal expansion of the housing without significantly altering the clamping pressure. Verification of the force is performed during assembly using a calibrated gauge or by measuring the deflection of the spring.
A well maintained preload prevents the rattling and fretting that leads to premature failure of the joint.