Meaning
Translation speed of a printing blade across a stencil foil determines the hydrodynamic pressure generated within rolling solder paste. Operational tuning of squeegee velocity controls paste shear rate and aperture filling completeness during the print cycle. This parameter governs stencil aperture infill time, paste roll hydraulics, and cycle time on automated print heads.
Its control influence ends once the blade passes an aperture and stencil snap-off begins.
Hydrodynamic Pressure
Forward motion of the angled metal blade forces solder paste to roll in a continuous cylinder across the stencil surface. Adjusting squeegee velocity changes the downward hydraulic force pushing paste into open stencil pockets. Speeds between twenty and fifty millimeters per second generate stable hydraulic forces that force non-Newtonian paste formulations into small aperture cavities.
If blade movement drops too low, hydrodynamic pressure collapses, causing incomplete aperture filling and thin solder deposits.
Aperture Infill
Fine-pitch aperture filling requires sufficient time for shear-thinned solder paste to flow downward under blade pressure. High squeegee velocity reduces contact duration over small apertures, preventing full paste volume transfer to underlying circuit pads. Conversely, moderate speeds allow paste viscosity to drop sufficiently under shear, filling aperture edges cleanly without scooping paste out of larger openings.
Speed Boundary
Mechanical vibration at excessive blade speeds compromises stencil contact stability. Excessive squeegee velocity causes blade skipping across etched metal surfaces, resulting in irregular deposit heights and print smearing.