Meaning
Insulating chemical reaction products forming on exposed metallic contact surfaces introduce unwanted electrical resistance into separable interconnects. Environmental exposure to airborne sulfur compounds and atmospheric moisture creates tarnish films ranging from a few angstroms to hundreds of nanometers in thickness. These surface layers alter contact physics by replacing direct metallic contact with high-resistance oxide or sulfide barriers.
Circuit performance degrades as these films grow, causing signal attenuation and electrical noise.
Chemical Formation
Atmospheric gases react continuously with base contact metals to form inorganic surface compounds. Copper contacts react with atmospheric sulfur dioxide and hydrogen sulfide to form cuprous sulfide layers. Silver surfaces readily tarnish in sulfur-bearing environments, producing highly resistive silver sulfide films even at low relative humidity levels.
Contact Degradation
Electrical conduction across tarnished surfaces shifts from metallic constriction flow to electron tunneling or dielectric breakdown. Thin films below two nanometers permit electron tunneling, maintaining moderate contact resistance. Thicker tarnish layers act as complete insulators until circuit voltages trigger dielectric breakdown or mechanical wiping displaces the film.
As ambient humidity increases, adsorbed moisture layers accelerate tarnishing rates and create electrolytic corrosion cells.
Prevention Strategy
Surface metallurgy choices and protective coatings mitigate tarnish growth on separable contacts. Applying noble metal platings such as gold or rhodium over base copper alloys provides an inert surface layer that resists chemical attack. Contact lubricants containing corrosion inhibitors shield underlying metal from atmospheric oxygen and sulfur compounds.
Environmental control within device enclosures using desiccant packs or vapor-phase corrosion inhibitors slows film growth rates during storage and operation.