Meaning
A physical calibration process establishes the spatial relationship between a robotic manipulator and its end-effector or surrounding fixture references. Performing tool baseline alignment is required to ensure that components are placed accurately during high-speed automated assembly tasks. The process is not required for manual assembly operations.
Calibration Mechanism
The robot moves its arm to several pre-defined touch points to compute the tool center point offset. During tool baseline alignment, optical sensors track the tip of the gripper to identify any deviation from the nominal design values. This correction is stored in the controller memory.
The arm moves with high positional repeatability.
Assembly Precision
High-density electronic products require micron-level accuracy when placing fine-pitch connectors. Continuous tool baseline alignment prevents damage to fragile pins and surface-mount devices. (The alignment is run at set intervals to adjust for thermal drift in the robot motor joints.) This minimizes defects during production.
Maintaining this alignment is also necessary when switching the robot end-effector to handle different housing styles during mixed-model assembly.
Verification Process
Quality control teams inspect the alignment results during the daily shift handovers. If the tool baseline alignment fails, the line is stopped to calibrate the sensors and robot joints. This keeps the defect rate low.