Meaning
Sudden, brief increases in electrical current that occur when electronic circuits switch states or active components turn on. These transient current spikes can cause voltage drops and electromagnetic interference if they are not properly controlled. They are common in digital circuits with high clock frequencies or when switching inductive loads like relays or motors.
Decoupling Strategy
Placing capacitors close to the power pins of integrated circuits is essential to supply the necessary charge during rapid switching events. This decoupling strategy of transient current spikes utilizes low equivalent series resistance capacitors to act as local energy reservoirs. When a circuit draws sudden current, the capacitor discharges rapidly, preventing the voltage on the power rail from dropping.
This local supply of charge ensures the stable operation of the circuit under heavy load. Designers often use a combination of different capacitor values to provide a low impedance path over a wide frequency range. This prevents high-frequency noise from spreading through the rest of the board layout.
Voltage Sag
Excessive drop in the power rail voltage can occur if the local charge reservoirs are insufficient to meet the sudden current demand. This voltage sag of transient current spikes can cause the digital processor to reset or corrupt the stored data. If the voltage drops below the minimum operating threshold, the circuit may enter an unstable state.
Designers must carefully calculate the required capacitance to prevent these disruptive voltage fluctuations.
Noise Mitigation
Shielding and routing techniques are used to minimize the propagation of electromagnetic noise generated by rapid current changes. This noise mitigation of transient current spikes involves keeping power traces short and utilizing ground planes to reduce loop inductance. When the trace inductance is low, the generated magnetic fields are minimized, reducing the noise coupled into adjacent signal lines.
These design practices are essential for passing electromagnetic compatibility testing.