Meaning
Firmware routines residing in read only memory enable the initial loading of code into a device through a universal asynchronous receiver transmitter interface. A UART bootloader provides a simple and reliable method for updating the system software of an embedded controller. It listens for a specific sequence of characters on the serial pins during the power on reset phase.
Once the handshake is successful, the bootloader accepts data packets and writes them into the internal flash memory. This secondary code path is often hard coded into the silicon of the microchip to ensure it cannot be accidentally erased by user software.
Recovery Path
Accessing the UART bootloader often requires a physical connection to the board, providing a secure way to perform factory resets. This mechanism acts as a fail safe when the main application image becomes corrupted or when the standard network based update fails.
Protocol Sequence
Packet transfer begins with a command that erases the existing application sectors to make room for the new data. During the write process, the UART bootloader performs checksum or hash verification on each block to ensure data integrity. After the final packet is confirmed, the system reboots and begins executing the newly installed firmware.
Security Implication
Physical access to the serial port is necessary to trigger the update mechanism in most production environments.