Meaning
Mathematical characterization removes predictable errors from radio frequency measurements by characterizing the signal path between a tester and a device. During the calibration of a vector network analyzer, vector error correction uses a set of known standards to identify losses, reflections, phase shifts, and delay in cables and connectors. This technique isolates the performance of the device under test by subtracting the response of the auxiliary test hardware.
Systematic Calibration
Measurement of open, short, load, and thru standards provides the data needed to build an error model. Because vector error correction accounts for both magnitude and phase, it can cancel out the effects of impedance mismatches that would otherwise distort the results. This calibration is typically performed at the start of every test shift or whenever a cable is changed.
Measurement Accuracy
Traceability to international standards ensures that the test results are defensible and repeatable across different locations. When vector error correction is applied correctly, the residual errors in the measurement are reduced to a negligible level.
Phase Alignment
Determination of the electrical length of the test leads allows for accurate timing measurements in high speed digital circuits. By shifting the measurement plane to the tips of the probes, vector error correction provides a clear view of the signal at the interface of the module. This capability is essential for debugging timing issues in complex connectivity modules.