Meaning
Highly refined electrolytic foil characterized by a surface roughness of less than two micrometers. Very low profile copper is used in high-frequency circuit boards to reduce the resistive losses caused by the skin effect. At frequencies above ten gigahertz, most of the current flows near the surface, making the texture of the metal critical to performance.
Loss Reduction
Smooth surfaces allow the signal to travel with minimal deviation and scattering at the metal-dielectric interface. Standard copper foils have peaks and valleys that effectively increase the distance the current must travel, whereas very low profile copper provides a more direct path. This efficiency translates to lower insertion loss and better signal integrity for millimeter wave applications.
Adhesion Tradeoff
Achieving a strong bond between the metal and the resin is more difficult when the surface is smooth. To compensate for this, manufacturers of very low profile copper apply specialized chemical treatments to provide mechanical grip without increasing electrical roughness. The resulting peel strength must meet industry standards to ensure the traces do not delaminate during assembly.
Fabrication Control
Handling these thin and smooth foils requires precise control over the etching and lamination parameters. Usage of very low profile copper is standard in the production of low-loss laminates for automotive radar and 5G infrastructure. These materials are qualified through rigorous thermal stress tests to verify the long-term reliability of the bond.