Meaning
The transient drop in supply voltage that occurs when a high-current load is activated represents a critical curve for assessing the stability of a power distribution network. Analyzing the voltage sag profile helps engineers determine if a device’s power supply can survive sudden current draws without resetting. This curve is defined by the depth of the voltage drop, the duration of the sag, and the recovery time.
The evaluation covers the voltage measured at the input pins of the main integrated circuits during load step changes, ending where the supply voltage stabilizes at its nominal level.
Trace Analysis
High-speed oscilloscopes capture the voltage drop when a modem activates its transmitter. The profile reveals a rapid initial drop followed by a gradual recovery as the power supply’s feedback loop responds. By measuring the minimum voltage reached during this transient, engineers can calculate the safety margin above the brownout threshold of the system.
This analysis is performed over a range of operating temperatures because battery internal resistance increases in cold conditions.
System Consequence
Insufficient voltage during these transients causes microcontrollers to execute involuntary resets. When the processor resets during a write cycle, it can corrupt the file system or leave the device in an unbootable state. In connected devices, this behavior is a common cause of field failures that require physical repair.
Mitigation Method
Adding bulk capacitance close to the high-current load reduces the depth of the voltage drop. The capacitors store charge that is released during the initial microsecond of the load step, smoothing out the sag before the primary power supply can react. Designers use low equivalent series resistance capacitors to ensure rapid current delivery during these events.