Meaning
The management of shared radio resources between two different wireless protocols operating in the 2.4 gigahertz frequency band prevents signal collisions and data loss. Wi-Fi ble arbitration is necessary when both radios share a single antenna or sit in close physical proximity. This coordination ensures that one radio does not transmit while the other is receiving a sensitive packet.
Without this control, the high-power wi-fi signal would overwhelm the bluetooth low energy receiver.
Coexistence Interface
Hardware signaling lines between the wi-fi and bluetooth chips facilitate real-time communication about the radio state. These pins allow the modules to request access to the medium and receive a grant or deny signal from the arbiter. A common implementation uses a three-wire or four-wire interface to exchange priority and timing information.
This low-latency connection is essential for protecting time-critical packets like voice data.
Priority Logic
A central controller evaluates the importance of pending tasks from both protocols to decide which radio gains access to the airwaves. High-priority events, such as bluetooth connection maintenance or wi-fi beacons, receive precedence over background data transfers.
Throughput Tradeoff
Sharing the spectrum inevitably reduces the maximum data rate available to each individual protocol. When both radios are active, the arbitration process introduces gaps in transmission that lower the effective bandwidth. This reduction is a necessary compromise to maintain the stability and reliability of both wireless connections.