Meaning
The alignment of receiver local timing with incoming signal transitions is a fundamental requirement in binary frequency shift keying demodulation. Achieving reliable 2-fsk synchronization prevents bit error rate degradation by ensuring the symbol decision circuit samples at the optimal point. The process involves preamble detection and carrier frequency offset estimation during the packet start sequence.
Acquisition Sequence
Receivers search for a known training sequence to identify the start of a frame. The tracking phase establishes the frequency and symbol boundaries before the payload begins. A delay-locked loop or digital matched filter correlates the received samples against the expected preamble pattern.
Once correlation exceeds a pre-defined threshold, the timing offset is corrected. Such correction must occur within the duration of the preamble to avoid missing the payload start frame delimiter.
Timing Recovery
Continuous tracking keeps the clock aligned during the payload phase. If the transmitter and receiver clocks drift, the decision threshold window shifts, which causes bit slips. Implementing a phase detector corrects these small drift errors.
The loop filter dampens high-frequency noise to maintain steady lock.
Operational Boundary
Maximum drift rates and preamble length limit the effectiveness of the synchronization process. High thermal drift in cheap crystals can exceed the lock-in range of the recovery loop. In such situations, the packet is lost.
The receiver must then reset to the search phase.