Meaning
American national standards provide the specific methods for determining antenna factors in electromagnetic compatibility testing. Compliance with ansi c63.5 ensures that measurement antennas provide repeatable data when verifying radiated emissions. These procedures apply to antennas from 9 kHz to 40 GHz.
Calibration labs use this document to validate the free-space gain of dipoles and biconical antennas.
Calibration Procedure
Reference sites for antenna characterization must maintain specific normalized site attenuation values. While ansi c63.5 outlines several techniques, the standard-site method remains a common choice for high accuracy. Technicians measure the transmission loss between three antennas in various pairs.
This process yields the individual antenna factors without requiring a known reference antenna.
Uncertainty Contribution
Traceability to national metrology institutes depends on the rigor of the mathematical model used during the test. Errors in ansi c63.5 measurements often stem from ground plane reflections or cable interactions. Calculations account for phase center variations across the frequency range.
A stable environment reduces the risk of reporting incorrect gain values.
Site Requirement
Facilities performing these calibrations must feature a large ground plane. The ansi c63.5 specification defines the physical dimensions of the test area to minimize multipath interference. Metallic surfaces must be flat to within specific tolerances.
Smaller sites may introduce reflections that invalidate the resulting calibration data.