Meaning
Measurement calibration shifts alter the transfer ratio between incident field strength and output voltage in test transducers over extended operational periods. Known as antenna factor drift, this deviation degrades the accuracy of radiated emissions measurements during electromagnetic compatibility compliance testing. The parameter quantifies the change in decibels per meter between scheduled calibration cycles for a reference antenna.
This metric applies to calibrated receiving antennas used in compliance chambers, excluding passive cable attenuation changes or receiver front-end gain shifts.
Calibration Instability
Thermal expansion of internal baluns and mechanical flexing of dipoles disrupt structural geometry during compliance testing. These physical shifts cause antenna factor drift, altering the correction values applied to spectrum analyzer raw data. Stable ambient chamber control minimizes thermal movement.
Handover Boundary
Transceiver module production certification relies on certified compliance test benches to validate radiated power levels. If antenna factor drift introduces a deviation exceeding zero point five decibels, passing devices risk false rejection or non-compliant units pass compliance checks. System integrators require calibration verification certificates every twelve months to validate measurement integrity.
The boundary of this drift evaluation remains confined to the transducer body and connected balun structure.
Verification Requirement
Reference antenna checks run before each regulatory test suite catch transducer degradation before formal recording begins. Comparison against a golden reference antenna isolates antenna factor drift from receiver noise floor variations.