Meaning
Discrepancies between the output impedance of a radio frequency source and the load impedance of the radiator cause signal loss. An antenna impedance mismatch results in a portion of the transmitted power returning toward the amplifier rather than radiating into free space. This condition is measured using the voltage standing wave ratio.
Energy Reflection
Signal power that cannot enter the antenna structure propagates back along the transmission line as a reflected wave. The antenna impedance mismatch creates standing waves that interfere with the forward signal. High reflection levels reduce the effective range of a wireless device.
Power transfer reaches its maximum only when the conjugate impedances are equal.
Thermal Impact
Energy trapped within the circuitry due to poor matching converts into heat within the power amplifier and the feedline components. An antenna impedance mismatch increases the operating temperature of the RF front end. Excessive heat can lead to frequency drift in oscillators or permanent damage to semiconductor junctions.
Cooling requirements for a system increase when the antenna system is inefficient. Designers use matching networks consisting of capacitors and inductors to minimize these losses.
Component Stress
High voltage peaks appearing on the transmission line can exceed the breakdown ratings of connectors and PCB traces. The antenna impedance mismatch forces the system to operate outside its designed parameters. Over time, the dielectric materials in the circuit board may degrade under the influence of these voltage spikes.
Protecting the radio requires a circulator or an automatic tuner to manage the reflected energy. Reliability testing usually includes operation into a high mismatch to ensure survival.