Meaning
Wireless signaling enhancement allows for the transmission of larger data packets across non-advertising channels to increase broadcast efficiency. Use of bluetooth low energy extended advertising enables a peripheral to send up to 255 bytes of data in a single event. This represents a substantial expansion over the legacy limit of 31 bytes.
The protocol achieves this by using the three primary advertising channels to point scanners toward secondary data channels where the actual payload resides.
Spectral Efficiency
Offloading data to the forty data channels reduces congestion on the three primary frequencies shared by all nearby devices. Because bluetooth low energy extended advertising utilizes frequency hopping for the auxiliary packets, it minimizes interference in dense radio environments. Such a mechanism ensures that multiple beacons can coexist without blocking each other.
Integration Benefit
Software developers use this feature to broadcast sensor readings or device status updates without establishing a formal point-to-point connection. It streamlines the discovery process for mobile applications that need to aggregate data from many nodes simultaneously. Integration of this capability requires support at both the hardware controller and the host stack level.
Power Overhead
Longer packet durations increase the radio on-time and the corresponding energy cost per broadcast. While bluetooth low energy extended advertising carries more information, the hardware must stay in a high-power state for a longer duration to complete the transmission. Selecting a lower physical layer rate further extends this time and increases the current draw.
The certification process verifies that the peak and average power consumption remain within the limits defined by the battery specification.