Meaning
Electromagnetic process where two or more radio frequency signals combine in a nonlinear component to produce new frequencies. In multiradio environments, carrier mixing occurs when high power transmissions from different radios interact in components like power amplifiers or mixers. This interaction creates unwanted intermodulation products that can interfere with sensitive receivers.
Mixing Mechanism
Nonlinear junctions in the signal path act as the site for frequency conversion. While carrier mixing is intended in mixers for upconversion, it is an accidental effect in passive components with poor material purity. These junctions generate sums and differences of the original frequencies.
Interference Result
Unwanted signals appear at frequencies calculated by multiplying the carriers by integers and adding or subtracting the results. If a product lands within the receive band, carrier mixing degrades the signal to noise ratio of the device. This specific noise floor elevation often causes desensitization in colocated receivers.
Engineers use filters to isolate transmitters and minimize these interactions. The severity depends on the proximity of the antennas and the linearity of the front end components.
Evaluation Method
Quantification of these products involves measuring the power level of the generated intermodulation relative to the carrier power. Spectrum analyzers detect the spectral regrowth caused by carrier mixing during simultaneous radio operations. High quality connectors and shielding help reduce the incidence of these nonlinearities.
Test sequences often include stress tests with multiple active radios to verify system stability.