Meaning
Switched-capacitor measurement techniques quantify unknown sensing capacitance by repeatedly transferring electrical charge from a touch pad to a larger sampling capacitor. Utilizing charge transfer sensing enables microcontrollers to convert small touch-induced capacitance changes into digital counts using plain general-purpose input and output pins. A driver circuit toggles the sensor electrode voltage and accumulates charge on the sampling capacitor across multiple clock cycles until reaching a fixed reference voltage.
This method delivers touch detection in human-machine interfaces without dedicated analog-to-digital converters.
Transfer Cycle
Charge accumulation proceeds through controlled switching phases managed by timer peripherals inside the microcontroller. During the charge phase, the internal switch connects the sensor pad to the supply voltage rail. The transfer phase disconnects the pad from the rail and connects it to the sampling capacitor, transferring a charge packet proportional to the electrode capacitance.
Counting the exact number of transfer cycles required to charge the sampling capacitor yields an accurate measurement of sensor capacitance.
Noise Immunity
Burst-mode charge transfers concentrate measurement energy into brief time windows, rejecting low-frequency noise from AC mains supply lines. Frequency hopping algorithms vary the charge switching frequency across successive acquisition bursts to mitigate narrow-band radio frequency interference. Differential charge transfer topologies suppress common-mode noise coupled into adjacent trace pairs.
Measurement Limit
High parasitic capacitance on long printed circuit board traces increases the initial charge packet size, reducing the dynamic range of the sampling capacitor. Water droplets on sensor pads create conductive bridging that mimics a continuous touch event, requiring software baseline algorithms to isolate valid touches. Elevated trace resistance slows down the charge transfer time constant, forcing longer charge pulse durations that reduce touch response frame rates.