Meaning
Subtractive manufacturing processes remove material from complex metal geometries without introducing mechanical stress. The method of chemical milling relies on acid or alkaline solutions to dissolve unwanted areas of a workpiece. It is used on aircraft panels and structural frames to reduce weight while preserving strength.
Chemical Action
Areas of the metal that must remain untouched are covered with a protective maskant before exposure to the etchant. When the prepared part is submerged, the exposed metal undergoes controlled corrosion and dissolves at a predictable rate. This action allows for uniform removal across contoured surfaces where mechanical cutters cannot easily reach, which helps produce thin-walled sections in lightweight structures without the risk of tool-induced deformation.
Process Control
Bath chemistry and temperature must be monitored to keep the dissolution rate steady. If the acid concentration rises or drops, the etching rate will deviate from the calculated schedule and result in incorrect dimensions. Operators check the bath regularly to adjust the mixture.
Structural Effect
Because the process does not use physical force, it avoids the residual stresses caused by milling tools. However, chemical milling of titanium can introduce hydrogen into the metal lattice, which requires subsequent vacuum baking to remove. This post-milling bake prevents the metal from becoming brittle.