Meaning
Mechanical precision elements provide controlled, repeatable motion by utilizing the elastic deformation of their own material rather than sliding joints. A monolithic flexure is machined from a single block of metal to eliminate the friction and backlash found in multi-part assemblies. This design ensures extremely high accuracy in positioning systems.
Kinematic Function
Movement is achieved through thin, flexible webs that bend when force is applied to the structure. Because there are no sliding contacts, the assembly does not suffer from wear or require lubrication. This makes the mechanism suitable for high-vacuum environments.
Material Requirement
Materials with high yield strength and low elastic modulus are selected to maximize the deflection range without causing permanent damage. Alloys like titanium or spring steel are preferred for these applications. The chosen metal must also resist fatigue under millions of cycles.
Production Method
Manufacturing relies on wire electrical discharge machining or precision milling to create the thin webs without introducing heat-affected zones. Any microcrack or surface defect left by the tooling will act as a stress concentrator and shorten the life of the component. Finishing steps must remove all surface roughness to ensure that the stress is distributed evenly across the flexing region during operation, which preserves the life of the unit.