Meaning
Radio receiving equipment positioned within the same physical enclosure or structural chassis as a local transmitter operates under extreme RF power exposure from neighboring antennas. A co-located receiver processes low-amplitude signals while high-power signals radiate from adjacent components within inches of its input circuitry. The designation applies to integrated multi-radio platforms and modular gateway cards.
The boundary of the concept ends where physical separation provides sufficient path loss to eliminate near-field coupling between antenna structures.
Isolation Boundary
Physical proximity between transmit and receive paths causes direct electromagnetic radiation across cavity walls and printed circuit board ground planes. Passive shielding and spatial separation establish baseline isolation prior to active filtering. Board-level integration procedures specify shielding cans and grounded fence vias to restrict radiation paths inside compact enclosures.
Desensitization Limit
Strong out-of-band signals from an integrated transmitter drive front-end low noise amplifiers into compression. This saturation elevates the noise floor of the co-located receiver, masking weak target signals and dropping packet reception rates.
Transceiver Integration
Design verification routines measure receiver sensitivity while local transmitters run at maximum output power across all supported frequency combinations. System integration tests validate notch filter rejection and digital interference cancellation blocks during concurrent operation. Final qualification requires meeting minimum signal-to-noise ratios across environmental temperature extremes.