Meaning
Transmission line structures comprising a center conductor flanked by parallel ground planes on the same printed circuit board layer provide controlled impedance RF signal routing. Incorporating a coplanar waveguide shield confines electromagnetic fields within the dielectric substrate between the signal trace and adjacent ground traces. Continuous ground vias stitch top-layer ground traces to internal ground planes at sub-wavelength intervals.
This geometry governs low-loss, high-isolation signal propagation in dense cellular and Wi-Fi front-end layouts up to millimeter-wave frequencies.
Field Confinement
Flanking ground traces draw electric field lines horizontally across the substrate surface. This planar field distribution reduces cross-talk to adjacent high-density signal lines in compact mobile devices. Impedance calculations account for trace width, dielectric constant, gap width, and copper thickness.
Via Stitching
Stitching vias arranged along the shielding ground traces eliminate parasitic slot-line modes that propagate along coplanar structures. Spacing stitching vias closer than one-tenth of the guided wavelength prevents high-frequency radiation leakage from escaping the transmission line channel. Solid internal ground planes directly below the coplanar layer create a grounded coplanar waveguide topology that offers superior shielding relative to ungrounded variants.
Routing Constraint
Sharp bends and abrupt width changes in the center trace disrupt controlled impedance, causing signal reflections that degrade total radiation efficiency. Solder mask deposition over coplanar traces alters the effective dielectric constant, requiring modified gap dimensions during layout. Excessive via density near trace edges weakens mechanical PCB strength in thin flexible substrate designs.