Meaning
Permanent shape alteration in conductive metallic interconnects occurs when mechanical stress from thermal expansion or clamp forces exceeds the elastic yield strength of the material. Excessive copper busbar deformation alters contact surface area, weakens bolted joints, and increases electrical resistance across battery pack module boundaries. The threshold applies to all high-current distribution paths where temperature cycling creates mechanical stress.
Yielding Mechanism
Differential thermal expansion between aluminum housing structures and conductive copper strips generates localized compression during high-discharge duty cycles. As thermal loads drive internal forces past the yield limit, copper busbar deformation causes micro-slipping at bolted interfaces and permanently alters connector geometry. Stresses redistribute into surrounding cell terminals when elastic recovery fails.
Permanent dimensional shifts lower contact force upon cooling.
Thermal Limit
Operating temperatures above high thresholds accelerate material softening and lower the yield point of copper alloys. Excessive heat combines with sustained clamping load to accelerate copper busbar deformation over extended field operations. Ohmic heating escalates rapidly when geometric distortion reduces the nominal contact area.
Joint Degradation
Uncontrolled plastic strain degrades structural integrity and causes increased interface impedance. When copper busbar deformation disrupts the initial torque preload, fastener relaxation accelerates thermal runaway risk in energy storage modules. Resistance growth at degraded terminals triggers premature voltage drop errors during pack discharge.