Meaning
Physical evaluation performed on sacrificial printed circuit board coupons manufactured along panel margins verifies substrate registration and copper plating thickness. Standardized coupons subject to coupon testing isolate manufacturing variables without consuming functional hardware. The boundary of this process stops at panel edge features and does not measure active component performance.
Sacrificial Geometry
Test patterns placed outside the primary board outline mirror the inner layer routing and hole drilling parameters of the main panel. Fabrication facilities execute coupon testing on these isolated features to evaluate etch factors and trace impedance. That data validates process stability before boards undergo final profiling.
Microsection Inspection
Destructive cross-sectioning isolates internal copper structures for optical measurement under calibrated magnification. Technicians performing microsection analysis within coupon testing measure barrel plating thickness and barrel thermal stress survival after solder bath exposure. This sectioning reveals barrel cracking or laminate voiding prior to assembly handover.
Detailed measurements confirm that inner layer interconnects maintain structural continuity through multiple heating passes. A passing microsection confirms that internal vias withstand peak reflow temperatures without barrel fatigue.
Handover Gate
Quality sign-off depends on automated test reports matching nominal mechanical drawing allowances. Receiving inspection accepts panel lots based on coupon testing data provided in the manufacturer quality traveler. Panel rejection occurs if structural measurements drift beyond established tolerances.