Meaning
Repeated mechanical loading beyond the elastic limit of a material causes progressive deformation and microstructural damage. This phenomenon is known as cyclic plastic strain, which occurs when electronic assemblies undergo thermal fluctuations during power cycles. Over time, the cumulative action of these stresses leads to the initiation of fatigue cracks in solder joints.
Thermal Stress
Mismatched coefficients of expansion between silicon chips and circuit boards drive the deformation during temperature transitions. Each thermal cycle forces the interconnects into a state of cyclic plastic strain as the assembly expands and contracts. Designers utilise underfill materials to redistribute the stress and protect the joints from premature failure.
Low-expansion materials reduce the severity of the deformation and extend the operational lifetime of the device.
Fatigue Life
Predictive models use the strain amplitude to estimate the number of cycles to failure. High strain levels lead to rapid crack propagation and electrical open circuits.
Material Characterisation
Laboratory testing utilizes specialized mechanical test frames to apply alternating loads to miniature solder specimens. These experiments measure the hysteresis loop of stress versus strain to determine the energy dissipated per cycle. Understanding this dissipation behavior helps engineers select solder alloys that are more resistant to thermal fatigue.
Alloys with higher fatigue resistance are essential for automotive and aerospace applications where temperature swings are common.