Meaning
Broadband directional radiator categorized by its waveguide transition and flared aperture. Integrating a double ridging horn antenna allows for wide frequency coverage without the need to swap components during a test sequence.
Bandwidth Extension
Metallic ridges inside the waveguide structure modify the dominant mode characteristics to support higher frequencies while suppressing higher order modes. When using a double ridging horn antenna, the ratio between the lowest and highest usable frequencies often reaches 18 to 1 or higher. Signal integrity remains consistent.
Aperture Efficiency
Energy distribution across the mouth of the horn determines the gain and beamwidth stability of the radiation pattern. Although the double ridging horn antenna provides broad coverage, the phase center often shifts as frequency changes. Proper mounting alignment prevents measurement errors.
Mechanical Tolerance
Machining precision on the ridge surfaces and the coaxial feed transition determines the return loss of the device. A standard double ridging horn antenna requires high quality connectors to ensure the voltage standing wave ratio stays below a defined threshold. Rigid construction prevents deformation under thermal stress.
The structural alignment of the ridges must be maintained to prevent skewing the radiation pattern at the highest operating frequency. Calibration for the gain of the antenna includes the loss of the internal transition.