Meaning
Technical categories defined by the Federal Communications Commission govern hardware using digital modulation techniques in the 902 to 928 MHz and 2.4 GHz bands. The dts equipment class applies to devices that achieve a minimum six decibel bandwidth of five hundred kilohertz. This classification allows for higher power levels than general purpose low power devices provided that specific spectral density limits are met.
Spectral Mask
Occupied bandwidth and out of band emissions must fall within strict limits to prevent interference. For a device in the dts equipment class, the power spectral density cannot exceed eight decibel milliwatts in any three kilohertz band during any time interval of continuous transmission. Limits on power spectral density ensure that the signal does not become too concentrated or bleed into adjacent channels.
Spectrally dense signals are thus prevented from disrupting other users of the band.
Compliance Requirement
Testing for this category involves measuring both the conducted power at the antenna port and the radiated emissions. A product certified under the dts equipment class must also comply with restricted band requirements to protect sensitive services such as aviation. Reports must clearly state the peak power and the average power observed.
Operational Boundary
Fixed point to point systems receive different treatment regarding antenna gain compared to mobile units. Within the dts equipment class, the rules allow for very high gain antennas in stationary installations if the transmitter power is reduced accordingly. High power transmissions in this category rely on these strict density limits to protect the integrity of the shared spectrum.