Meaning
Electromagnetic emissions originating from the boundary discontinuities of printed circuit boards can cause electronic systems to exceed permitted noise limits. This edge radiation occurs when high-speed signals travel near the board border and couple to the parallel plates of the substrate. The resulting fields escape into the surrounding enclosure.
Physical Origin
High-frequency currents flowing through copper traces create electromagnetic fields that propagate through the dielectric material of the board. When these fields reach the unfinished edge of the substrate, they scatter into free space due to the abrupt change in impedance. This scattering forms a line source of unwanted emissions.
Design Consequence
Shielding effectiveness decreases when these emissions bypass localized metal cages and leak into the main chassis. If a device fails compliance testing due to edge radiation, the redesign process can delay product launches. It forces engineers to re-evaluate the board layout and dielectric stackup.
Mitigation Strategy
Implementation of a continuous guard ring of vias connected to the ground plane creates a barrier that captures the stray fields. This structure prevents the fields from reaching the board boundary. Additionally, the outer signal layers should be routed well away from the board edge to minimize the risk of coupling.
Designers can also employ the twenty-H rule, where the ground plane extends beyond the power plane by twenty times the dielectric thickness, to decrease emissions from the edges.