Meaning
Unified electromagnetic standards drafted by the European Telecommunications Standards Institute regulate short-range radio devices operating in the frequency range from twenty-five megahertz to one thousand megahertz. In radio frequency design and product compliance, EN 300 220 specifies limits for transmitter output power, spurious emissions, and receiver sensitivity. This compliance ensures that wireless modules do not cause harmful interference to other spectrum users.
Achieving this certification is mandatory for marketing wireless hardware in Europe.
Spectrum Requirements
Different sub-bands have unique duty cycle limits to prevent any single transmitter from hogging the channel. For instance, devices using EN 300 220 on the common eight hundred and sixty-eight megahertz band must often limit their transmission time to less than one percent. This restriction allows hundreds of sensors to share the same local airspace without collisions.
These rules apply to both industrial and domestic applications, protecting utility meters and security alarms from interference.
Compliance Testing
Certified laboratories run precise tests using anechoic chambers to confirm that the hardware meets these requirements. During the testing phase, the device under test must demonstrate that its out-of-band emissions do not exceed the specified microwatt limits. These tests must be performed under extreme temperature and voltage conditions.
This step is a prerequisite for the Declaration of Conformity.
Receiver Performance
Modern versions of the document place strict focus on receiver resilience to adjacent signals. This prevents high-power mobile transmitters from blocking nearby low-power receivers. Devices certified under EN 300 220 are categorized by their risk level, with safety-critical systems held to the highest blocking standards.