Meaning
High-strength carbon and alloy steels that have been quenched and tempered to achieve a minimum tensile strength of 150,000 pounds per square inch form a specific class of industrial fasteners. Hardware made from grade 8 steel is widely used in heavy-duty structural mountings for cellular base stations.
Mechanical Strength
Heavily-loaded assemblies that support heavy radio equipment on high towers must resist failure under dynamic loads. Due to the high yield strength of grade 8 steel, these fasteners undergo very little plastic deformation before reaching their elastic limit. This allows them to maintain a constant clamp load over long service lives.
The material properties are carefully verified using hardness and tensile tests before deployment in the field.
Fastener Assembly
Tightening procedures for high-strength bolts require precise torque control to ensure they reach their design tension. Because grade 8 steel possesses high shear and tensile capabilities, it can be tightened to much higher preloads than standard mild steel fasteners. This high tension prevents joint slippage and bolt fatigue during thermal cycling and high-frequency vibration.
In many designs, hardened steel washers are placed under both the bolt head and the nut to distribute the heavy clamping force. Spreading the load in this manner prevents the fastener from crushing the softer metal flanges of the transceiver chassis, securing the assembly against dynamic forces.
Environmental Failure
Susceptibility to hydrogen embrittlement is a primary concern when using very high-strength steel fasteners in outdoor environments. When grade 8 steel is electroplated with zinc to prevent rust, the plating process can trap hydrogen atoms in the metal matrix. This can lead to sudden, catastrophic failure under high tension.
Baking the fasteners immediately after plating is required to drive out the trapped hydrogen and ensure the integrity of the joint.