Meaning
Dissipation of the tension stored in a tightened fastener reduces the clamping pressure holding an assembly together. The preload loss occurs through various mechanisms such as thread embedding, gasket creep, material fatigue and thermal mismatch. It is the difference between the installation tension and the residual tension after a period of service.
This process ends when the joint reaches a state of mechanical equilibrium or when the fastener becomes loose.
Embedding Mechanism
Surface roughness on the threads and bearing faces flattens out under the pressure of the initial tightening. This microscopic collapse causes an immediate preload loss as the bolt slightly shortens. Re-torquing the fastener after twenty-four hours is a common method to compensate for this initial settlement.
Most of this movement happens within the first few seconds of the load being applied.
Thermal Effect
Differential expansion between the bolt and the joined parts changes the internal stress. When the assembly cools, a measurable preload loss might occur if the bolt shrinks more than the flange. This is particularly common in aluminum housings with steel fasteners.
Maintenance Schedule
Periodic checks ensure that the remaining tension is sufficient for safety. Predictive maintenance schedules use records of preload loss to predict when a joint will require replacement. This data is collected using ultrasonic tension meters during routine inspections.