Meaning
Spectral boundaries established by regulatory bodies limit the amount of unwanted energy a device can radiate at multiples of its fundamental operating frequency. A harmonic emissions mask defines the maximum power levels allowed across the radio frequency spectrum to prevent interference with other electronic equipment. Standards such as those from the FCC or ETSI specify these limits based on the device class and the intended environment.
Compliance ensures that a high power transmitter does not disrupt sensitive receivers nearby.
Regulatory Threshold
Limits are typically expressed in decibels relative to the carrier power or as absolute power levels in dBm. The harmonic emissions mask is stricter for equipment used in residential areas where the density of devices is high. Industrial equipment might operate under more relaxed constraints depending on local laws.
Designers use these figures to determine the required attenuation for output filters.
Suppression Technique
Low pass filters or band pass filters integrated into the antenna path remove the unwanted peaks. Applying a harmonic emissions mask to a design often requires multiple stages of filtering to meet steep roll off requirements. Inductors and capacitors must have high quality factors to minimize loss at the desired frequency.
Shielding the transmitter circuitry also helps in containing radiated energy.
Design Compliance
Spectrum analyzers measure the output of a device while it transmits at maximum power. Engineers compare the measured peaks against the harmonic emissions mask stored in the test software. Any signal that breaks through the limit line results in a failure.
Certification laboratories provide the final report needed for commercial sale.