Meaning
Localized thermal repair methods used for surface-mount devices on printed circuit boards direct a controlled stream of heated gas to melt solder connections. This method of hot gas rework is the standard approach for replacing complex components like ball grid arrays or quad flat no-lead packages. The high accuracy of the gas flow prevents neighboring components from being disturbed during the repair process.
Heating Mechanism
Nitrogen or compressed air passes through a heating element and a custom nozzle designed to match the component dimensions. The hot gas rework station focuses the heated stream directly onto the component leads, shielding the rest of the board from heat. Flow rate and temperature are carefully regulated to ensure uniform heating across the entire device area.
This ensures all solder joints melt at the same moment.
Thermal Profile
Replicating the original factory reflow cycle is necessary to avoid damaging the replacement component or the board. Technicians program the hot gas rework system with a multi-stage thermal profile that includes preheating, soak, reflow, and cooling stages. Preheating prevents thermal shock, which can crack the silicon die or warp the laminate.
The ramp-up to reflow is kept brief to minimize the duration of the high-temperature state.
Damage Avoidance
Substrate shielding with high-temperature polyimide tape provides an extra layer of protection during hot gas rework of dense assemblies. This prevents accidental reflow of adjacent passive components.