Meaning
Acoustic emission calibration procedures involve breaking a specific diameter and hardness of graphite lead against a surface to simulate a repeatable elastic wave event. Breaking the lead provides a consistent step function input that mimics a real crack growth or impact. Performing a hsu-nielsen source test allows technicians to verify the sensitivity and coupling of sensors used for structural health monitoring.
Procedure Standardization
Success depends on the use of a mechanical guide to maintain a constant angle and pressure. The hsu-nielsen source test uses a 0.5 millimeter or 0.3 millimeter lead with a specified 2H hardness. When the lead snaps, it releases a known amount of energy into the material.
This creates a broadband pulse that travels to the transducer.
Sensor Verification
Monitoring the arrival time and amplitude of the wave confirms that the sensor is bonded correctly to the test object. Inconsistent results from a hsu-nielsen source test indicate air gaps in the couplant or a fault in the cabling. Technicians compare the captured waveform against a baseline to ensure the entire measurement chain is operational.
Application Limit
Surface roughness and material damping affect the propagation of the simulated signal. Consequently, the test must be performed in several locations to map the attenuation characteristics of the structure.